Abstract
This paper reports an experimental investigation of the rotordynamic fluid force and moment on a centrifugal impeller with three types of wear-ring seals; i.e., a face seal and two types of toothed seals. The impeller is equipped with a vaneless diffuser. Rotordynamic fluid forces and moments on the impeller in whirling motion were measured directly by using four-axis force sensor. Unsteady pressures were measured at several locations in the diffuser. It was found that, (1) at low flow rate, the fluid force and fluid force moment become maximum at a certain whirling speed caused by a coupling between the whirl motion and vaneless diffuser rotating stall and (2) the seal geometry with axial seal affects the direction of the coupled fluid force relative to the direction of eccentricity through the change in the unsteady leakage flow due to the whirl.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.