Abstract
BackgroundThe negative effect of long-term working load on lumbar is widely known. However, insertion of different resting modes on long-term working load, and its effects on the lumbar spine is rarely studied. The purpose of this study was to investigate the biomechanical responses of lumbar spine with different levels of degenerated intervertebral discs under different working-resting modes.MethodsFour poroelastic finite element models of lumbar spinal segments L2-L3 with different grades of disc degeneration were developed. Four different loading conditions represented four different resting frequencies, namely, no rest, one-time long rest, three-time moderate rests, and five-time short rests, on the condition that the total resting time was the same except in the no rest mode. Loading amplitudes of diurnal activities included 100 N, 300 N, and 500 N.ResultsWith increasing resting frequency, the axial effective stress and fluid loss decreased, whereas the pore pressure and radial displacement increased. Under different resting frequencies, the changing rate of each biomechanical parameter was different.ConclusionsUnder a situation of fixed total resting time, high resting frequency was advisable. If sufficient resting frequency was unavailable for healthy people as well as patients with mildly and moderately degenerated intervertebral discs, they could similarly benefit from relatively less resting frequencies. However, one-time rest will not be useful in cases where intervertebral discs were seriously degenerated. Reasonable working-resting modes for different degrees of disc degeneration, which could assist patients achieve a better restoration, were provided in this study.
Highlights
IntroductionInsertion of different resting modes on long-term working load, and its effects on the lumbar spine is rarely studied
The negative effect of long-term working load on lumbar is widely known
Changes in the geometrical and material parameters that occurred in different degenerated discs are investigated, and the results showed that the axial displacement, facet force, and total fluid loss are reduced with increasing degeneration [5, 22]
Summary
Insertion of different resting modes on long-term working load, and its effects on the lumbar spine is rarely studied. The purpose of this study was to investigate the biomechanical responses of lumbar spine with different levels of degenerated intervertebral discs under different working-resting modes. Intervertebral discs are pads of hydrated fibrocartilage comprising gelatinous nucleus and fiber-reinforced annulus fibrosus. These discs lie between vertebral bodies, and ensure the flexibility of spine as well as the transmission of load by maintaining the balance between internal osmotic pressure and external pressures. A compressive test on the nucleus demonstrated that the effective aggregate modulus decreases with increasing degeneration, whereas the permeability gradually increases [6]
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
