Effects of Rapid Heat Treatments on the Properties of Cu2O Thin Films Deposited at Room Temperature Using an Ammonia-Free SILAR Technique

Abstract

We report herein the analysis of the properties of copper(I) oxide thin films deposited by an optimized ammonium-free successive ion layer adsorption and reaction (SILAR) technique. The Cu2O thin film deposition process was carried out at room temperature using copper acetate monohydrate, sodium citrate as complexing agent, and hydrogen peroxide as precursors of copper and oxygen ions, respectively. The harmless and easy-to-handle sodium citrate replaces the volatile NH4OH commonly employed as complexing agent in the SILAR technique for the deposition of metal oxide thin films. The optical, structural, morphological, and electrical properties of the as-deposited Cu2O thin films were studied as a function of the number of cycles during deposition, as well as their modifications produced by the effect of rapid thermal annealing (RTA) in vacuum in a temperature range of 200–250°C for 1 min, 3 min, and 5 min. The as-deposited thin films had cubic crystalline structure corresponding to the Cu2O phase as determined by x-ray diffraction (XRD), with a direct energy bandgap of 2.43–2.51 eV depending on the number of cycles, and electrical resistivity of the order of 103 Ω cm. The XRD and x-ray photoelectron spectroscopy (XPS) analysis of the Cu2O thin films treated by RTA demonstrated an increase of the crystal size with time and temperature of the RTA and reduction effects from Cu2+ to Cu1+ oxidation states. On the other hand, the RTA treatments also decreased their energy bandgap to 2.38 eV and electrical resistivity to 102 Ω cm. The high energy bandgap values of the Cu2O thin films were attributed to quantum confinement effects produced by their small crystal size in the range of 3.6–8.6 nm.Graphical