Effects of promoter and dedoping process on electrorheological response of polyaniline-graft-chitosan copolymer

Abstract

In this study, electrorheological (ER) properties of biodegradable and conducting polyaniline-graft-chitosan (PAni-g-CS) copolymer particles were investigated. For this purpose, PAni and PAni-g-CS particles were synthesized by using in situ oxidative radicalic polymerization method. At first, PAni and PAni-g-CS/silicone oil (SO) ER suspensions (15% V/V) were subjected to external electric field and they exhibited low ER activity. When the external electric field strengths ([Formula: see text] were increased, both the suspensions showed electrical breakdown. Therefore, virgin PAni and PAni-g-CS were first subjected to dedoping process by treating with 1.0 M NaOH(aq) and non-ionic surfactant Triton X-100 (T-X) surfactant to enhance the expected ER activity and prevent the electrical breakdown. But we observed that the addition of T-X as promoter had no significant effect on the ER activity. On the other hand, electric filed-induced viscosities of both the suspensions were observed to enhance after the dedoping (DD) process and electrical breakdown prohibited. After the DD process, DD PAni-g-CS/SO ER system exhibited the highest electric field-induced viscosity by reaching 400[Formula: see text]Pa[Formula: see text]⋅[Formula: see text]s at [Formula: see text][Formula: see text]kV/mm. The highest ER efficiency was also obtained for DD PAni-g-CS/SO system at 15% (V/V) as 79. Additionally, typical shear thinning non-Newtonian viscoelastic behavior was observed under externally applied E. The conduction model of DD PAni-g-CS/SO system was determined to well fit the conduction model by showing a slope of [Formula: see text] calculated from the E vb. yield stress graph. In conclusion, conducting and biodegradable-dedoped PAni-g-CS particles would be a good candidate for potential ER applications as dry-based ER materials having high colloidal stability of 76%.