Abstract
The purpose of the present study was to evaluate the effects of four experimental primers on bond strength between a self-curing luting agent and silver-palladium-gold alloy. The experimental primers were in mixed solutions of a thiouracil primer (Metaltite) and a phosphate primer (Epricord, PM, PE, or PP), which were designated as Metaltite/Epricord, Metaltite/PM, Metaltite/PE, and Metaltite/PP respectively. Three primers (Metal Primer II, V-Primer, and Alloy Primer) were also prepared as controls. Alumina-blasted metal alloys were bonded with acrylic rods. After 5,000 thermocycles, the maximum shear bond strength was obtained with Metaltite/PE (27.8+/-2.4 MPa) and Metaltite/Epricord (27.6+/-5.9 MPa), followed by Metaltite/PP, Alloy Primer, Metaltite, Metaltite/PM, Metal Primer II, V-Primer, and Epricord. PE, PM, and PP showed the lowest bond strength. Results of this study revealed that the combined use of a thiouracil monomer and a phosphate monomer improved adhesive bonding. In this light, clinicians should pay attention to the types of functional monomers dissolved in a primer when fabricating resin-bonded prostheses.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
