Abstract

AbstractPressure (p) and inter‐electrode distance (d) are important parameters in the process of depositing hydrogenated nanocrystalline silicon (nc‐Si:H) by very high frequency plasma enhanced chemical vapour deposition (VHF PECVD). High quality nc‐Si:H materials are normally deposited at high pressure (1 mbar < p < 7 mbar). However, systematic research on the combined effects of p and d is rare. In order to optimize nc‐Si:H for solar cells, such effects are investigated for a silane‐hydrogen discharge at high pressure conditions. All nc‐Si:H layers were deposited at fixed hydrogen dilution ratio (H2/SiH4), power and frequency. With optical emission spectroscopy, direct images taken by a photo camera and by 1D SiH4/H2 plasma simulation, three different series were analyzed to study the combined effects of p and d at high pressure. The effects on the crystalline ratio and the porosity of the deposited silicon layers were also investigated. When the p ·d product is constant, the plasma sheath becomes relatively thinner when d increases. When p or d increases independently, the electron density decreases. All the above modifications can increase the deposition rate, but by different mechanisms. When nc‐Si:H is deposited at a p ·d product of 30 mbar·mm, compact material with high crystalline ratio is obtained (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call