Abstract
Porosity effects on shear properties of 2D C/SiC were investigated based on the corresponding shear damage mechanisms. The results show that as the total porosity increases from 12.2% to 26.1%, the interlaminar shear strength decreases from 44.58MPa to 17.80MPa according to a power law, while the in-plane shear strength decreases linearly from 143.25MPa to 74.38MPa. Under interlaminar shear stress, delamination is resulted from matrix cracking and interface debonding/sliding mechanisms. Effects of porosity on interlaminar shear strength is controlled by the volume fraction of the delaminated matrix. Under in-plane shear stress, echelon matrix shear cracking and large scale fiber bridging mechanisms occur. The decreasing of in-plane shear strength depends on the spacing between the echelon cracks. Since the interface debonding/sliding mechanism occurs under both in-plane and interlaminar shear stresses, a relationship is obtained that the in-plane shear strength equals the sum of the interlaminar shear strength and the fiber bridging term under the minimum total porosity about 30.5%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
