Abstract

Tight oil sandstones have large oil reserves but low waterflooding efficiency and oil recovery. The movable oil saturation (MOS) is a critical parameter for evaluating oil recovery in water-driven tight oil sandstone reservoirs. However, its controlling factors in tight oil sandstones are still not well understood. In this study, the tight/low-permeability sandstones in the Chang 8 and Chang 9 Members of the Honghe Oil Field in the Ordos Basin (China) provide an opportunity to determine the effects of pore structure on the MOS. Porosity, permeability, thin sections, scanning electron microscopy (SEM), large field-of-view SEM imaging method (MAPS technique), high-pressure mercury intrusion (MICP), and micro-CT scanning were systemically conducted to analyze the pore structure analysis. MOS values were obtained from the relative permeability tests. The results show that porosity, pore-throat size, and the sorting coefficient have no evident relationship with the MOS. Many of the higher-permeability samples even show lower MOS values. Moreover, analysis of micro-CT images before and after waterflooding indicates that the lower-permeability samples tend to swept larger areas than the higher-permeability samples, resulting in greater oil-displacement efficiencies and MOS values. Instead, the cumulative mercury saturation at the apex of the mercury injection hyperbola curve (Sapex), the ratio of the maximum pore-throat radius and the medium pore-throat radius (Rmax/R50), and movable fluid saturation (MFS) show a good linear relationship with the MOS. The displaced oil is primarily from intergranular pores and partly from intragranular pores. The micropores that are widely distributed at the grain-grain contact display low original oil saturation and low oil displacement efficiency. It is proposed that the volume of the well-connected pores that contribute to permeability is the key factor controlling the MOS regardless of the type of rock.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call