Abstract
With the increasing of the operating frequencies, insertion loss, signal propagation delay, and parasitic coupling capacitance become the significant problems. Small capacitance ( C) between interconnects is required to reduce the crosstalk, insertion loss, and RC delay associated with the metal interconnect system. Therefore, the interconnect with low dielectric constant ( k) material is required. Implementation of Cu/low- k dielectric is used for reducing insertion loss, RC delay, crosstalk noises, etc. In this work, Cu–hydrogen silsesquioxane (HSQ) systems are studied. Ammonia (NH 3) plasma is employed for the nitridation of HSQ. The effects of NH 3 plasma treatments on the high frequency characteristics (100 MHz to 20 GHz) of the interconnect structure Cu/Ta/HSQ and electrical behaviors of Cu/Ta/HSQ/Pt MIM capacitors are evaluated. Auger electron spectroscopy (AES) results suggest the diffusion of oxygen and copper atoms during copper annealing. This raises resistance of Cu interconnect and increases the conductance of the HSQ films. Hence, 400 °C-annealed Cu/Ta/HSQ interconnect systems become lossy at high frequencies (>2 GHz). Ammonia (NH 3) plasma bombardments break some of the Si–H bonds and the resulting dangling Si bonds increase the moisture absorption. Meanwhile, NH 3 plasma treatments reduce the leakage current by passivating the Si dangling bond and forming silicon nitride. The absorption of moisture and/or the formation of SiN x result in high dielectric constant of HSQ after prolonged NH 3 plasma bombardment. The dielectric constant of HSQ decreases and then increases with the increase of NH 3 plasma treatment time and a minimum dielectric constant of 2.2 is obtained after 50 s NH 3 plasma treatment at 200 W. Among various specimens in this study, the smallest insertion loss is 1.97 dB/mm at 20 GHz for the 400°C-annealed Cu/Ta/HSQ (NH 3-plasma-treated for 50 s). Appropriate NH 3-plasma bombardment helps to form a thin SiN x barrier layer which prevents the diffusion of oxygen without increasing the dielectric constant of the Cu–HSQ interconnect system. The leakage currents versus electric field characteristics suggest that a Schottky emission dominate conduction mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.