Abstract
An ultra-high modulus (UHM) carbon fibre was submitted to an oxygen plasma treatment. The effects of this treatment on the physical and chemical properties of the carbon surfaces were investigated by using surface characterisation techniques. SEM and STM studies were performed in order to determine the changes in the surface morphology. Observations on the nanometre scale lead to the conclusion that the plasma oxidation “cleaned” the original surfaces of carbonaceous impurities. XPS analysis of the treated fibres revealed a very significant increase of oxygen content. Single-fibre epoxy composites were prepared from as-received and plasma-treated fibres, and fragmentation tests were performed in order to characterise fibre/matrix interfacial adhesion. Raman spectroscopy has been used to map the strain along the fibre during tensile loading of the matrix, and the distribution of interfacial shear stress has been obtained. The quality of the interface improved dramatically after the surface treatment, supporting the ability of cold plasma oxidation to enhance the adhesion of UHM carbon to epoxy matrices. It is concluded that the increase of the oxygen surface content and the removing of the outermost layers may contribute in a co-operative way to the improvement on fibre/matrix adhesion.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Composites Part A: Applied Science and Manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
