Effects of piezoelectric energy harvesting from a morphing flapping tail on its performance

Abstract

Monitoring fish migration, which can extend over distances of thousands of kilometers, via fish tags is important to maintain healthy fish stocks and preserve biodiversity. One constraint of current fish tags is the limited power of their batteries. Attaching a piezoelectric element to an oscillating part of the fish body has been proposed to develop self-powered tags. To determine the functionality and potential of this technology, we present an analysis showing variations of the generated voltage with specific aspects of the tail’s response. We also perform numerical simulations to validate the analysis and determine the effects of attaching a piezoelectric element on performance metrics including thrust generation, propulsive efficiency, and harvested electric power. The tail with the attached piezoelectric element is modeled as a unimorph beam moving at a constant forward speed and excited by sinusoidal pitching at its root. The hydrodynamic loads are calculated using three-dimensional unsteady vortex lattice method. These loads are coupled with the equation of motion, which is solved using the finite element method. The implicit finite different scheme is used to discretize the time-dependent generated voltage equation. The analysis shows that the harvested electric power depends on the slope of the trailing edge, a result that is validated with the numerical simulations. The numerical simulations show that, depending on the excitation frequency, attaching a piezoelectric element can increase or decrease the thrust force. The balance of required hydrodynamic power, generated propulsive power and harvested electrical power shows that, depending on the excitation frequency, relatively high levels of harvested power can be harvested without a high adverse impact on the hydrodynamic or propulsive power. For a specified frequency of oscillations, the approach and results can be used to identify design parameters where harvested electrical power by a piezoelectric element will have a minimal adverse impact on the hydrodynamic or propulsive power of a swimming fish.