Abstract

Multilayer graphene platelet and expanded graphite were deposited on alumina disk surface and their effects on tribological performance of an alumina–alumina contact in different environments were evaluated using a pin-on-disk tribometer. Experimental results indicate that coefficients of friction at the contact are reduced by deposited particles due to their lubricating effect. It is interesting to find that wear of the contact in dry conditions is less than that under liquid lubrication. Tribofilm plays a key role in the wear reduction performance. In liquid media, however, formation of tribofilm is limited due to fluid flow and formed thin tribofilm is not able to protect the contact from wear. Experimental results show that formation of tribofilm is improved by both multilayer graphene platelet and expanded graphite. This is attributed to the higher adhesion force between graphene and alumina than that between alumina and alumina. The findings demonstrate that deposition of graphene-based materials onto alumina surface hold the promise of providing a new pathway to increase the anti-wear performance of alumina and possibly other ceramics.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.