Abstract
The objective of this study was to investigate the effect of phosphorus slag powder (PSP) and polyester fiber (PF) on the rheological properties of asphalt binder and performance characteristics of resultant mixtures. It is also of great interest to determine whether the PSP can be used to replace conventional filler (i.e., limestone powder) without negatively affecting the mixture performance. A laboratory experiment was developed which included characterization of PSP and PF, determinations of the optimum content of PF and optimum PSP-binder ratio, and performance evaluation of asphalt mixtures with various combinations of PF, PSP and limestone powder. The PSP behaved effectively as a mineral filler such that it increased the binder viscosity resulting in enhanced mixture rutting resistance. The use of PF significantly improved the mixture resistance to low-temperature cracking and moisture damage as indicated by the flexural strain and tensile strength ratio results. Overall, mixture with 3% PF at the PSP-binder ratio of 1.0 outperformed the others with limestone powder and/or PF, indicating the feasibility of recycling PSP and PF into asphalt mixtures for satisfactory mixture performance.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.