Effects of particle sizes on performances of the multi-zone steam generator using waste heat in a bio-oil steam reforming hydrogen production system

Abstract

Hydrogen production by bio-oil steam reforming is an advanced production technology. It is a good method of coupling waste heat utilization with bio-oil steam reforming to produce hydrogen, which increases the cleaning ability of the bio-oil steam reforming system. A multi-zone steam generator using waste heat has been proposed, which can produce the heat source and steam source of the hydrogen system. The DEM model of the multi-zone steam generator was set up. The model has been used to investigate the effects of particle sizes (40 mm–80 mm). With increasing particle size, the flow index and the flow uniformity gradually decrease, the vertical velocity gradient increases in the area on both side with the zone steam generator, and the vertical velocity fluctuation amplitude gradually increases. So, the hydrogen production decreases from the particle size increasing.