Abstract
Stable Fe3O4-water nanofluids are prepared and sedimentation observation is used to investigate its stability. A convection heat transfer experiment is set up to investigate the thermo-hydraulic performances of Fe3O4-H2O nanofluids in a circular tube considering the effects of different nanoparticle mass fractions (ω = 1.0%, 3.0% and 5.0%), Reynolds Numbers (Re = 600–11000) and paralleled magnetic induction intensities (B = 0G, 100G, 200G and 300G). The result is that Nusselt number is proportional to nanoparticle mass fraction but opposite trend is found with the increasing paralleled magnetic induction intensity. Nanofluids with ω = 5.0% show the best performance of heat transfer. The resistance coefficient increases with mass fraction and can be enhanced by magnetic field further. Nanofluids with ω = 5.0% under magnetic induction intensity B = 300G show the largest resistance coefficient. A comprehensive evaluation index and an exergy efficiency evaluation plot are developed to discuss the thermo-hydraulic performances of nanofluids from quantity and quality. The thermo-hydraulic performance increases with nanoparticle mass fraction but decreases with paralleled magnetic induction intensity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
