Abstract
Abstract Different combinations of normalizing and tempering were carried out to optimize the microstructure and enhance the high-temperature mechanical properties of HRB400FR fire-resistant steel bars. The results showed that with the increasing of the tempering temperature from 400 to 600°C, the steel bar’s hardness decreases linearly, mainly due to the formation of quasi-polygon ferrite and granular bainite. Besides, the reduced width and the dissolution of the lath bainite also undermine the performance of the tempered steel bars. The highest Vickers hardness of 380 HV is achieved when the steel is normalized at 950°C and then tempered at 400°C, mainly due to precipitation strengthening and bainite strengthening. The hardness of the test steel tempered at 600°C gives the lowest value, only 230 HV since the least amount of bainite is obtained. When the tempering temperature reaches 650°C, the hardness rises to 260 HV due to the formation of the lath bainite. The emergence of needle bainite generally reduces the matrix grain size, and the appearance of lath martensite refines the precipitated carbides.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
