Abstract
Recently, the authors have reported the compatibility of a non-proton-conducting oxide, yttria-stabilized zirconia (YSZ), for the ceramic matrix phase in the composite anode supports of thin-film protonic-ceramic fuel cells (PCFCs). In the previous work, it was identified that the NiO-YSZ anode support not only reduces the fabrication temperatures but also eases to produce the thin-film elements for PCFCs over them, providing an easily-sintered and flat substrate. The current study shows the effect of the NiO-YSZ supports on the performance of thin-film PCFCs when grain sizes of the supports increase. From the comparison with the previous study, it was found that OCVs increased slightly but the power outputs dropped to about half at the operating temperature regime of 450‒650 ºC. It represents that the non-proton-conducting support is not directly involved in the fuel cell reaction of PCFCs, but the electrochemical performance is closely related the preparation of the anode support. The details are discussed in this manuscript.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.