Effects of Ni-doping on microstructure, magnetic and microwave absorption properties of CoFe2O4

Abstract

In this paper, the Co1−xNixFe2O4 (x = 0, 0.1, 0.3, 0.5) ferrite material sample was successfully synthesized by the sol–gel combustion method. Using XRD to detect the phase, it was found that a pure sample was prepared, and the corresponding unit cell model was established using XRD data. At the same time, using Raman spectroscopy analysis, the change of the T2g(1) peak in the Raman spectrum indicates that the doping of Ni2+ ions replaces the Co2+ ions in the tetrahedral position, and the high-frequency shoulder-like characteristics also indicate that the octahedral position has been replaced. The substitution of Ni2+ ions for Co2+ ions causes lattice distortion, which leads to the destruction of the ferromagnetic sequence and thus changes in magnetic properties. Microscopic observation was performed with SEM to observe the structure. It was found that with the doping of Ni2+ iron, the grain size gradually decreased, and the decrease of the grain size would have an impact on the space charge polarization. At the same time, the phenomenon of electronic polarization was found in the analysis of the microwave absorption mechanism. To explain the occurrence of this phenomenon, Raman detection was performed on the sample. The Raman detection is combined with the bond length and bond angle changes in the unit cell to analyze the Ni element. The reason for doping electron polarization. When the Ni doping amount is 0.1, the reflection loss of Co1−xNixFe2O4 at 16.24 GHz is 37.66 dB, the corresponding thickness is 2.1 mm, and the effective frequency band is 2.64 GHz, which meets the requirements of light, thin and wide microwave absorbing materials.