Abstract
Microstructure and mechanical properties including tensile strength as well as creep resistance of Ni-Coated Carbon Nanotube reinforced Sn–Ag–Cu solders were investigated in this study. Addition of 0.05wt% Ni-Coated Carbon Nanotubes improved the ultimate tensile strength of composite solder slabs (up to 9.80%) and joints (up to 15.95%). The increase in strengthening effect of solder joints can be attributed to the consumption of Ni by interface reaction during soldering. Nanoindentation results revealed that the creep behaviors of composite solders were improved significantly as compared to that of the unreinforced solder alloy. Finite-element modeling showed that load transfer by Carbon Nanotubes took effect but was far smaller than the effect of Ni-Coated Carbon Nanotubes served as obstacles preventing dislocations gliding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
