Effects of nickel shell microcapsules and short fibers on polyamide 6‐matrix composites: Thermal, surface wetting, mechanical, and tribological properties

Abstract

AbstractThe excellent lubricating properties of microcapsules have been well recognized in modified polymers though very few reports have mentioned the practical application for engineering parts. In this study, different short fibers and nickel shell microcapsules (NMS) synergistically modify PA6 and injection molded to prepare bearings. With 10 wt% NMS, the COF could be reduced from 0.45 to 0.1. Fibers can effectively overcome bearing failure resulting from crushing the matrix under high loads or rapid peeling wear at high swing frequencies, which can warrant the effective lubrication of NMS and the formation of high‐quality transfer film. The bearing long‐life test shows very stable and low COF and wear with the feasibility to utilize microcapsules modified polymers in journal bearings.