Abstract
As a typical low heating value fuel, blast furnace gas (BFG) is used as an alternative fuel for gas turbine combustion. Due to its high concentration of inert gas components, natural gas is usually added to improve ignition and stable combustion in the combustion chamber. In this paper, laminar flame characteristics of BFG/CH4/air mixtures were investigated using constant volume combustion chamber and CHEMKIN package using the Gri-Mech 3.0 model. Experiments and numerical simulations were conducted at an elevated pressure and temperature of 0.2 MPa and 453 K, equivalence ratios of 0.8–1.4, and mixing ratios of methane of 0, 5, 10, 15%. The results show that the laminar burning velocity decreases rapidly from 24.19 cm/s to 13.90 cm/s at ϕ = 1.4 with the increase of methane addition from 0% to 15%, but obviously increases from 16.49 cm/s to 28.68 cm/s at ϕ = 0.8, from 21.05 cm/s to 35.65 cm/s at ϕ = 1.0, from 23.52 cm/s to 32.09 cm/s at ϕ = 1.2 with the increase of methane addition from 0% to 15%. Meanwhile, methane addition has an opposite effect on the Markstein length at ϕ = 0.8–1.2 and ϕ = 1.4. The thermal, transport and chemical effects were examined, exhibiting a major role of the thermal effect in the range of ϕ = 0.8–1.2 and a significant contribution of the chemical effect at ϕ = 1.4 to the laminar flame propagation of BFG/CH4/air mixtures. Further sensitivity analysis shows that R38 (H + O2 ↔ O + OH) and R52 (H + CH3 (+M) ↔ CH4 (+M)) are the main chain branching and chain termination reactions, respectively. Analysis on flame structure indicates that concentrations free radicals, especially OH and H evidently increase with methane addition. The maximum mole fraction of OH increases almost linearly from 1.02×10-3 to 3.82×10-3 with the increase of methane addition from 0% to 15%. The maximum mole fraction of H increases with a lower gradient than that of OH from 1.31×10-3 to 2.89×10-3 with the increase of methane addition from 0% to 15%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
