Abstract
The present experimental work is carried out on SAE 420 steel to optimize process parameters of low-power laser hardening to improve surface micro-hardness and wear resistance for dry sliding for bio-medical applications. Laser power is the most significant factor for micro-hardening and wear resistance. Rank two for scanning speed and three for standoff distance, respectively. The experiments show that the surface micro-hardness of treated samples varies from 711 to 833 Vickers Pyramid Number by optimized process parameters such as laser beam power of 300 W, laser scan speed of 1.0 mm/s, and standoff distance of 225 mm. In comparison, the base material micro-hardness is 208 Vickers Pyramid Number as the predictive equation generated for finding micro-hardness value for the above three laser hardening process parameters. The dry sliding wear test is conducted on all laser-treated samples and a comparison is made with the untreated sample. A significant improvement in wear resistance was observed for treated as compared to untreated samples. The wear of laser hardened sample of SAE 420 steel was 3.67 x10-9 g/cm compared to untreated base metal wear rate of 139.00 x 10-9 g/cm at an applied load of 30 N and sliding speed of 300 revolutions per minute. The scanning electron microscopy analysis of wear samples (untreated, treated maximum, and minimum hardness) is observed for investigating material removal patterns.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
