Effects of loading speed on the failure behaviour of FRP composites

Abstract

PurposeThe objective of the present work is to ascertain the failure modes under different loading speeds along with change in percentage of constituents of FRP composites.Design/methodology/approachThis involves experimental investigation of FRP composites with woven roving fibers and matrix. Different types of composites, i.e. glass: epoxy, glass: polyester and (carbon+glass): epoxy are used in the investigation with change in percentage of constituents. The variability of fiber content of the composite is in the range of 0.55‐0.65 weight fractions. The matrix dominated property, like inter laminar shear strength (ILSS) has been studied by three point bend test using INSTRON 1195 material testing machine with increasing five cross head velocities.FindingsThe variation of ILSS of laminates of FRP composites is significant for low loading speed and is not so prominent for high speed. The variation of ILSS are observed to be dependent on the type and amount of constituents present in the composites. The laminates with carbon fiber shows higher ILSS than that of glass fiber composites. The laminates with epoxy matrix shows higher ILSS than polyester matrix composites for the same fiber. There is no significant variation of ILSS beyond loading speed 200 mm/min and this can be used for specifications of testing. Matrix resins such as polyester and epoxy are known to be highly rate sensitive. Carbon fiber are relatively rate independent and E‐glass fibers are rate sensitive. Woven roving carbon glass fiber reinforced polymer shows small rate dependence and woven roving glass fiber reinforced polymer shows significant rate sensitivity.Originality/valueThe findings are based on original experimental investigations in the laboratories of the institute and can be used for characterization of composites.