Abstract
Vegetative propagation of strawberry (Fragaria × ananassa Duch.) in the plant factory with artificial lighting is considered as an effective approach to produce high-quality transplants. In this study, mother plants of ‘Benihoppe’ strawberry were grown hydroponically for 50 d under eight LED lighting treatments by combining four levels of light intensity (200, 250, 300 and 350 mol/(m2·s)) and two photoperiods (12 h/d and 16 h/d). Runner development, growth of runner plants, photon yield and energy yield in runners and runner plants were investigated to evaluate the strawberry propagation efficiency. Results indicated that length of runners decreased linearly with increasing daily light integral (DLI) under each photoperiod and was significantly shorter under photoperiod of 16 h/d. Runner elongation was inhibited by high DLI. Number of runners and runner plants formed by mother plants increased by 38.9% and 33.7%, when DLI increased from 8.6 to 11.5 mol/(m2·d), respectively; however, no further increase was observed when DLI was higher than 11.5 mol/(m2·d). Similar trends were found in crown diameter and biomass of primary and secondary runner plants. Negative impact of high DLI (20.2 mol/(m2·d)) on photosynthetic capacity of runner plants was observed as a decrease in leaf net photosynthetic rate, potential maximum photochemical efficiency of PSII, and chlorophyll content. Furthermore, photon yield and energy yield in runners and runner plants decreased significantly with increasing DLI. Therefore, DLI in a range of 11.5-17.3 mol/(m2·d) is beneficial to improve strawberry propagation efficiency and quality of runner plants, and 11.5 mol/(m2·d) is optimal for the strawberry propagation of runner plants in the LED plant factory because of the higher photon and energy yields. Keywords: hydroponic strawberry, vegetative propagation, daily light integral, photon yield DOI: 10.25165/j.ijabe.20191206.5265 Citation: Zheng J F, He D X, Ji F. Effects of light intensity and photoperiod on runner plant propagation of hydroponic strawberry transplants under LED lighting. Int J Agric & Biol Eng, 2019; 12(6): 26–31.
Highlights
Commercial strawberry (Fragaria × ananassa Duch.) transplants are usually propagated vegetatively by runners
An effective approach for vegetative propagation of high quality transplants is to produce in a plant factory with artificial lighting (PFAL) under precisely controlled environment[4,5]
Light-emitting diode (LED) light is used as the sole-source lighting for plant growth in the PFAL
Summary
Commercial strawberry (Fragaria × ananassa Duch.) transplants are usually propagated vegetatively by runners. An effective approach for vegetative propagation of high quality transplants is to produce in a plant factory with artificial lighting (PFAL) under precisely controlled environment[4,5]. Productivity of strawberry plug transplants in the PFAL was 110-140 times greater than that by using conventional propagation methods[6]. Light-emitting diode (LED) light is used as the sole-source lighting for plant growth in the PFAL. Light intensity and photoperiod determine the daily light integral (DLI), which is closely related to electricity input for LED lighting. The electrical energy consumption of lighting is approximate 70% to 80% of total electricity consumption for year-round production in PFALs[7].
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Agricultural and Biological Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
