Abstract
The geotechnical properties of hydrocarbon-contaminated soils have been greatly concentrated so far due to its effectiveness and significance in various aspects of engineering applications. In this regard, several hydrocarbon contaminants and diverse soil types were considered in the literature aiming at evaluating physical, chemical and engineering characteristics of hydrocarbon-contaminated soils including particle size, hydraulic conductivity, compaction and compressibility, internal friction and cohesion as well as shear strength. Meanwhile, small-strain shear modulus of hydrocarbon-contaminated soils ( or ) has not been precisely focused. In this paper, bender element (BE) test was employed to examine the effects of a hydrocarbon (light crude oil) on shear wave velocity and the resultant of Iranian silica sand, Firoozkooh sand. In this connection, various methods of determining shear wave travel time in BE test were firstly evaluated, and the most reliable ones (start-to-start method and cross-correlation function) were employed to analyse the results. The values of were found highly sensitive to crude oil contamination and confining pressure so that increased after uniformly mixing oven-dried sand with 4 wt.% of crude oil under various confining pressure; however, the degree of induced changes diminished as confining pressure grew. Moreover, adding more crude oil up to 8 wt.% substantially decreased the value of to an amount slightly higher than that of the clean sand. Beyond this oil content (≥8 wt.%), followed a status of scattering and there was not significant alteration to be cited. The analytical results obtained by BE test about the hydrocarbon-induced alteration on could be confirmed by the microstructure observations via scanning electron microscopy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: European Journal of Environmental and Civil Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.