Effects of Level, Loading Rate, Injury and Repair on Biomechanical Response of Ovine Cervical Intervertebral Discs.

Abstract

A need exists for pre-clinical large animal models of the spine to translate biomaterials capable of repairing intervertebral disc (IVD) defects. This study characterized the effects of cervical spinal level, loading rate, injury and repair with genipin-crosslinked fibrin (FibGen) on axial and torsional mechanics in an ovine cervical spine model. Cervical IVDs C2-C7 from nine animals were tested with cyclic tension-compression (-240 to 100N) and cyclic torsion (± 2° and ± 4°) tests at three rates (0.1, 1 and 2Hz) in intact, injured and repaired conditions. Intact IVDs from upper cervical levels (C2-C4) had significantly higher torque range and torsional stiffness and significantly lower axial range of motion (ROM) and tensile compliance than IVDs from lower cervical levels (C5-C7). A tenfold increase in loading rate significantly increased torque range and torsional stiffness 4-8% (depending on amplitude) (p < 0.001). When normalized to intact, FibGen significantly restored torque range (FibGen: 0.96 ± 0.14, Injury: 0.88 ± 0.14, p = 0.03) and axial ROM (FibGen: 1.00 ± 0.05, Injury: 1.04 ± 0.15, p = 0.02) compared to Injury, with a values of 1 indicating full repair. Cervical spinal level must be considered for controlling biomechanical evaluations, and FibGen restored some torsional and axial biomechanical properties to intact levels.