Abstract
Laser-arc hybrid additive manufacturing (LAHAM) based on the synergistic interaction of laser and arc has vast potential applications due to the advantages of high precision and fast manufacturing speed. Titanium alloy is a kind of indispensable material in the aerospace and marine industries because of its superior performance. This study primarily investigates the effect of laser power on formability, microstructure evolution, and mechanical properties of Ti-6Al-4V, a titanium alloy fabricated by LAHAM. The results indicate that the material utilization of the Ti-6Al-4V wire first increases and then decreases with the increasing laser power, reaching a maximum value of 95.48% at a power of 1500 W. As laser power increases, the acicular martensite α′ content in the LAHAM samples decreases, while the α phase increases and exhibits a coarsening phenomenon. Tensile strength increases with the rise in laser power, reaching a maximum horizontal tensile strength of 1080 MPa and a maximum vertical tensile strength of 1100 MPa. However, elongation decreases with increasing laser power. Microhardness decreases with the rise in laser power. The increase in laser power enhances the bonding between deposition layers, significantly improving the tensile strength of the specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have