Abstract

Numerical simulation models for pile group-superstructure in liquefiable and non-liquefiable sites were established. The validity and reliability of the numerical model are verified by the shaking table test results. Based on the cross-correlation analysis of superstructure acceleration-pile bending moment and soil displacement-pile bending moment obtained from the tests, the coupling law of kinematic and inertial interaction and its influence on pile failure modes were discussed combined with the numerical simulation results. The results shown that the effect of kinematic interaction on piles were greater than that of inertial interaction in both types of sites, but coupling mechanisms of kinematic and inertial interaction were different. For the liquefiable site scenario, the middle part of piles was prone to bending failure and the kinematic interaction was the main reason for it. For the non-liquefiable site scenario, the inertial interaction had an obvious influence on the pile failure occurred at the pile top. The results of parameter analysis shown that the mass of the superstructure was the most important parameter of inertial interaction in the liquefiable site. Parameters of inertial interaction would affect the vibration of the superstructure in the non-liquefiable site, but the influence on pile bending moments was not obvious.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call