Abstract
The structure of the pressure swirl nozzle is the key factor affecting the atomization quality. Optimal design of nozzle structure is conducive to improving the atomization quality and has important significance for improving the efficiency and stability of the combustor. The effect of the swirl section diameter, the contraction section angle, the straight section diameter, and the expansion section angle on the spray cone angle and the liquid film thickness is studied by numerical simulation. The results show that the liquid film thickness and spray cone angle both decrease with the increase of the expansion section angle. As the straight section diameter increases, the spray cone angle and liquid film thickness both increased. Both the spray cone angle and the liquid film thickness have an optimal contraction angle value that is 60° and 45°, respectively. The increase in the ratio of the swirl section diameter to the straight section diameter can increase the liquid axial velocity. When the nozzle outlet has an expansion angle, the thickness of the liquid film is reduced. When the expansion section angle, the straight section diameter, the contraction section angle, and the swirl section diameter of the nozzle is 30°, 4 mm, 45°, and 12 mm, respectively, the atomization performance of this nozzle is the best.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.