Abstract
Calcium phosphate films were formed by electron beam evaporation of β-TCP with and without simultaneous Ar ion beam bombardments. The Ca/P ratio was 0.76 without bombardments, but it was increased to 1.80 by bombarding of Ar ion beam extracted from the ion gun set to 0.8 A. Hydroxyapatite peaks were developed and became stronger with increases in beam current. The variations in chemical composition had an effect on the dissolution behaviors in isotonic saline solution showing two distinct features, pinhole and flat region. The dissolved thickness measured in the flat region of all calcium phosphate coating layers after 10 h immersion was similar with the range of 5450 and 6100 Å. However, the size of pinhole was larger for the calcium phosphate coating layer with the lower Ca/P ratio indicating more active dissolution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.