Abstract
AbstractThe purpose of this paper is to investigate the effects of injection parameters on combustion and emission characteristics of a six-cylinder diesel-piloted direct-injection natural gas engine at idle conditions. The tests were conducted at three injection pressures (15, 18, and 24 MPa), two different injection intervals (0.7 and 1.0 ms), and start of natural gas injection in the range of 4–13° before top dead center (BTDC). The experimental results revealed that in terms of cylinder pressure and heat release rate, the maximum cylinder pressure and the maximum heat release rate were substantially higher at the injection pressure of 24 MPa and increased gradually with advanced injection timing, while only slightly influenced by injection interval. In terms of combustion parameters, the ignition delay was reduced by adoption of higher injection pressure and the rapid combustion duration was extended more evidently with the advance of injection timing. In terms of emissions, application of relatively ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
