Effects of Impurities and Additives on Interactions of Nuclear-Grade Graphite with Molten LiF-NaF-KF

Abstract

It has been widely acknowledged that the presence of impurities in molten fluoride salt can alter the salt/material interactions. However, the effects of various impurities such as oxides, metal fluorides, reducing impurities, etc., on the behavior of nuclear-grade graphite in molten fluoride salts have not been reported. This study focuses on understanding the effects of various oxidizing and reducing impurities on the wetting and infiltration behavior of molten FLiNaK salt for nuclear-grade IG-110 graphite. Our results suggest that different impurities can cause different effects on nuclear graphite–molten salt interactions, with some impurities leading to significant degradation of the graphite. Our results demonstrate that certain impurities, such as Cr2O3 and CrF3, lead to a limited increase in wetting and infiltration of molten salt into nuclear graphite, while impurities such as Li2O lead to significantly increased wetting and infiltration throughout the cross section of the graphite specimen. Certain impurities, such as Li, can also lead to significant degradation of the graphite in the salt, with the extent of degradation increasing with the increase in the quantity of Li added. Our results also demonstrate that firing of IG-110 graphite at 900°C under a reducing atmosphere made the graphite surface resistant to wetting by molten FLiNaK salt, as compared to the nonfired sample.