Effects of ignitors and turbulence on dust explosions

Abstract

The aim of this work is in an attempt to increase the understanding of the acting behaviour of pyrotechnic ignitors and their effects on confined dust explosions. Flame visualization has shown that pyrotechnic ignitors can initiate an explosion by instantaneous jet-like volumetric and/or multipoint ignition. Hence, the rate of pressure rise and also the apparent burning velocity will be increased to some extent, depending on the ignitor energy and the reactivity of the mixtures. The ignitor effect is more important for the early stages of flame propagation and would be more significant in small explosion chambers. Thus, for dust explosion tests with various purposes, use of pyrotechnic ignitors should be made carefully, and the ignitor effect must be accounted for in the data interpretation. Turbulence induced by dust dispersion is a dominant factor in affecting dust explosions. At different ignition delays, however, the turbulence influence will be coupled with that of ignitors. This complicates further the interpretation of explosion data measured under turbulent conditions.