Effects of H2/CO ratio and CO2 dilution on the explosion behavior and flame evolution of syngas/air mixtures

Abstract

Syngas, which is used as both a fuel and a raw material, presents numerous safety risks during its utilization. In this paper, the effects of H2/CO ratio (R = 0%, 30%, 50%, 70% and 100%) and CO2 dilution ([CO2] = 0%–20%) on the explosion behaviors of syngas/air mixtures with different equivalence ratios (φ = 0.8, 1.0, 1.6, and 2.5) are examined via experiments and numerical calculations. The results show that the peaks of explosion pressure and OH* spectral intensity are significantly influenced by the H2 percentage in the syngas. The introduction of CO2 notably decreases these parameters in oxygen-rich and severe oxygen-poor states. Additionally, the flame propagation speed noticeably increases with increasing H2 proportion in the syngas. The influence of CO2 on the buoyancy instability of the spherical flame of syngas is considered negligible when compared to that of other combustible gases, such as CH4. Nevertheless, the presence of CO2 decreases the density ratio between the unburned gas and burned gas and increases the flame thickness of syngas/air mixtures. This trend reduces the cellular instability of the spherical flame, particularly in severe oxygen-poor states. Notably, there is a definite correlation between the formation of cellular flames and the rise rate of explosion pressure. The cellular structure on the flame surface becomes more pronounced when the rise rate of explosion pressure increases. Conversely, it develops later or is noticeably inhibited. Furthermore, the main reaction pathways are H2 → ∙OH → H2O2 → H2O and H2 → ∙OH → CO → CO2 during the syngas explosion process. ∙OH is critical in the entire chain reaction because it promotes the conversion of H2 to H2O and acts as a vital connection between the reactants H2 and CO in the explosion process.