Abstract
The lost foam casting process utilizes polymeric foam patterns to produce the metallic components. Foamed polymer patterns are coated with a refractory slury, dried and embedded in unbonded sand. Molten metal is poured directly on the coated polymer. The polymer is thermally decomposed and is gradually replaced by the liquid metal to create the casting after solidification. Expanded polystyrene (EPS) is the most common pattern material used in commercial practice. In this paper, experiments are conducted to examine the filling of an aluminum alloy melt into the molds. The purpose is to observe some parameters such as the gate cross-section area, vaccum pressure, gas gap length, metal pouring temperature in lost foam casting of aluminum. The results indicate that the gate section, metal pouring temperature and vaccum pressure affect directly the mold-filling time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
