Effects of gastric acid and mechanical toothbrushing in CAD-CAM restorative materials: Mechanical properties, surface topography, and biofilm adhesion

Abstract

ObjectiveTo evaluate the effects of simulated gastric acid erosion combined with mechanical toothbrushing abrasion on the mechanical properties, surface topography, and biofilm adhesion of different CAD/CAM materials. Material and methodsSpecimens of zirconia-reinforced lithium silicate glass-ceramic (ZLS), polymer-infiltrated ceramic network (PICN), feldspathic glass-ceramic (FE), and two nanoceramic resins (RK, RG), were submitted to the following challenges: erosion (E), abrasion (A), erosion combined with abrasion (E + A), or remained untreated (control - C). After challenges, flexural strength was evaluated, while microhardness (KHN) and surface roughness (Ra) were tested before and after treatments. The biofilm adhesion (Streptococcus mutans ATCC 700610, Streptococcus sanguinis ATCC 10556 e Candida albicans MYA 2876) was determined by the counting of colonies forming units per milliliters (UFC/mL) after erosive and abrasive challenges. ResultsFE showed the lowest flexural strengths, while ZLS and RG exhibited the highest, while PICN and RK, had intermediate values. PICN, ZLS, and FE showed lower microhardness after E and E + A challenges than polymer-based materials (RG and RK). FE surface roughness increased after E and E + A challenges and after A and E + A challenges for RK. Biofilm formation after erosive/abrasive challenges was higher on ZLS than FE, RK, and RG, but no different than PICN. RK and RG exhibited the lowest biofilm formation among the groups. Furthermore, E + A challenges held significant changes in the surface of the materials, which were more severe on the surface of glass ceramics and hybrid materials. ConclusionErosive challenges combined with abrasion negatively influenced the mechanical properties and surface topography of most CAD/CAM materials and increased the biofilm adhesion on ZLS. Besides, the severity of the damage is related to the type and composition of each material.