Abstract
Oxy-fuel combustion exhibits combustion and heat transfer characteristics different from air-fuel combustion due to high concentrations of CO2 and H2O. This study evaluated the effect of gas and particle emissions on radiative heat transfer in oxy-fuel combustion of coal. For a hexahedral furnace, prescribed gas compositions based on combustion calculation were used to simplify the combustion reactions. The values of radiative heat fluxes (qrad) were compared for different combustion modes, flue gas recirculation (FGR) methods, particle concentrations, furnace sizes and O2 concentrations in the oxidizer. The radiation was calculated by the discrete ordinate method with gaseous emission predicted by the weighted sum of gray gases models (WSGGMs). The results showed that employing an optimized WSGGM is essential for the accurate prediction of qrad in oxy-fuel combustion for gaseous fuels. The conventional WSGGM showed large errors for larger furnace volumes or under dry FGR conditions. With higher particle concentrations such as in pulverized coal combustion, however, qrad was dominated by emission of particles. The effect of gas emissivity was not critical in the furnace with a mean beam length of 8.3m. Oxy-fuel combustion with wet FGR had higher qrad than dry FGR. The O2 concentration in the oxidizer was a key parameter for oxy-fuel combustion since increasing its value linearly increased qrad.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
