Abstract
An optimum finish rolling deformation (FRD) of thermomechanical controlled processing (TMCP) is suggested to improve the hydrogen-induced ductility loss of high-vanadium X80 pipeline steel in this study. The results demonstrate that with increasing FRD the microstructure refines, the grain size of the steel decreases and the recrystallization degree deepens. The increase of FRD leads to the reduction of low angle grain boundaries (LAGBs) and the grains oriented with plane {100} parallel to normal direction ({100}//ND) fibres, which plays a significant role in improving the resistance of crack propagation. Besides, the differences of effective hydrogen diffusion coefficient and diffusible hydrogen concentration are negligible among four experimental steels with various FRD. However, the best hydrogen-induced ductility loss resistance is obtained in the steel with 40% FRD containing the most nano-scale precipitates acting as effective hydrogen traps.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
