Abstract
A series of monotonic and cyclic triaxial tests were performed on a sand with fines sourced from Christchurch, New Zealand. The sand was sieved and then mixed to give three soils with different fines contents. The undrained tests were used to examine the effects of fines on the strain softening behaviour under monotonic loading and liquefaction resistance in cyclic loading. Two reference states were used as a basis for evaluation of the effects of fines: the relative density and the steady state line within the state-concept framework for sand characterization. The addition of fines to the sand base caused downward movement of the steady state line in the Dr-p' plane (e-p' plane), and this effectively increased the potential for strain softening or flow deformation. Samples prepared at an identical relative density showed decreasing cyclic strength with increasing fines content. Conversely, samples at an identical initial state relative to the steady state line showed increasing cyclic strength with the fines content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.