Abstract
In this work, indium tin oxide (ITO) thin films were grown on a glass substrate without introducing oxygen into the growth environment using RF magnetron sputtering technique. The dependence of surface morphological, optical and electrical properties at different film thicknesses and sputtering RF power were investigated. Results showed that these properties were strongly influenced by the film thickness and sputtering RF power. It was found that the resistivity, sheet resistance and optical transmittance of ITO thin films deposited on glass substrate decreased as film thickness increased from 75 to 225 nm while the surface roughness and optical bandgap increased. The optimum properties were obtained for ITO films 225 nm thick grown at 250 W RF power. This has revealed an excellent figure of merit of (38.4 × 10−4 Ω−1) with average transmittance (83.3 %), resistivity (9.4 × 10−4 Ω cm), and carrier concentration (6.1 × 1020 cm−3). These ITO films are suitable for use in solar cells applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.