Abstract
Biogas production from anaerobic digestion (AD) of biowastes is restricted by the recalcitrant nature of many substrates, and this may also reduce the fertiliser value of the produced digestate. The degradability of substrates can potentially be enhanced by physico-chemical pre-treatments before AD, and/or the degradation can be increased by a longer digestion time. In this study, we evaluated the effects of electrokinetic (high voltage) and ultrasonication pre-treatments of biowastes in a two-step AD process on nitrogen fertiliser replacement value (NFRV) of digestates obtained from two biogas plants with contrasting hydraulic retention time (HRT) in the primary AD step. The fertiliser value was tested by direct injection to spring barley and surface-banding to winter wheat, and the ammonium N was 15N-labelled to evaluate ammonia losses. The electrokinetic pre-treatment step significantly (p < 0.05) increased the NH4+-N/total N in the digestates before the second AD step but had an insignificant effect on the fertiliser value in winter wheat and spring barley. Ultrasonication pre-treatment had also no significant effect on the fertiliser value. The two-step AD significantly (p < 0.001) increased 15N recoveries and mineral fertiliser equivalence of labelled ammonium-N in winter wheat and reduced ammonia losses, with a significant effect (p < 0.001) observed in digestates sourced from a shorter HRT biogas reactor. The fertiliser equivalence of labelled ammonium-N in the digestates was 80–88% after injection, indicating relatively low N immobilisation with all the digestates. NFRV in the crops was mainly explained by the NH4+-N/total N ratio, C/N ratio and dry matter content of the digestates. The findings suggest that electrokinetic and ultrasonication pre-treatments combined with a second AD step have no considerable impact on the fertiliser value of digestates, whereas a second AD step significantly reduced ammonia losses after application by surface-banding in winter wheat.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have