Abstract
AbstractDissolution mass transfer from the trapped phase to the flowing phase in porous media occurs in various hydrogeology processes. One of the important phenomena is dissolution fingering and its effect on dissolution mass transfer. In this work, dissolution mass transfer in porous media with various particle sizes and distribution was investigated in pore scale and meso‐scale by using X‐ray microcomputed tomography. The specific interfacial area and mass transfer coefficient were measured by following the representative elementary volume concept, and the effect of dissolution fingering was evaluated. Linear instability theory was used for the prediction of dissolution finger width () at the onset of dissolution fingering. Although dissolution fingering tends to develop when the porous media container diameter () is smaller than half of , its effect on mass transfer coefficient starts to occur when is larger than the whole . Starting this point, dissolution fingering decreases the mass transfer coefficient by three times. For validation, an additional experiment with a larger porous media container size was performed, and three dissolution fingers were successfully observed. Their size was found to be comparable with the theoretical prediction based on linear instability theory.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.