Abstract
This paper presents a multi-DOF motion sensing system consisting of a permanent magnet (PM) and a magnetic tensor sensor (MTS) comprising a 3×3 array of three-axis digital magnetic flux density (MFD) sensors, and the methods to measure their relative MTS-PM position/ orientation in a 3D space. The design enables redundant differential measurements of MFD vectors and gradient tensor components to account for the singularities due to matrix inversion, providing a basis to explore different methods for multi-DOF estimation of the PM position/ pose. Formulated as a two-stage linear least-square (LS) problem to take advantage of the dipole simplicity and exploit its physics revealed by its inverse model to guide the design of a fully connected artificial neural network (ANN) to account for the MTS measurement noise and un-modeled factors, a prototype multi-MTS system capable of 5-DOF motion measurements is developed and evaluated experimentally along with a study analyzing the parametric effects on the estimation accuracy; both stationary and moving sensor scenarios are considered. Enhanced with a fully connected ANN, an accuracy within a root-mean-square error (RMSE) of 40μm spatial position and 0.1° pose can be uniquely obtained without subtracting a predetermined geomagnetic field in both fixed and moving multi-MTS scenarios, representing a significant improvement over the (0.5mm, 1°) RMSE of the single-MTS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have