Abstract
This paper describes the study of high-speed liquid jets injected in air from an orifice. The main focus is to study the effect of different liquid properties on the characteristics of the high-speed liquid jets injected in ambient air. The high-speed liquid jets are generated by the impact of a projectile, which known as impact acceleration method, launched in a horizontal single-stage power gun (HSSPG). The conical nozzle of 30° angle with the orifice diameter of 0.7 mm was used to generate the jets. The characteristics of high-speed jets were visualized by the high-speed digital video camera with shadowgraph optical arrangement. From the shadowgraph images, the jet formation, atomization, vaporization and shock waves were obviously observed. The maximum averaged velocity of water, alcohol, n-hexane, chloroform and glycerin jets is estimated to be 1,669.03 m/s, 1,548.59 m/s, 1,420.44 m/s, 1,204.46 m/s and 1,496.97 m/s, respectively. That effect on the maximum penetration distance of the water jet is longer than that of all jets. Surface tension and latent heat are the significant physical property for jet formation, while density, kinematics viscosity and heat capacity are not.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.