Abstract
Power combustion systems have the potential for thermoacoustic instabilities, with many possible detrimental results. The present study experimentally investigates effects of the distribution of various heat sources on a Rijke tube. An electrical heater was designed to realize different tangential distributions of heat release by changing the spacing of the heating element. The experimental results showed that an optimum spacing exists to minimize the starting power of thermoacoustic oscillation and growth rate, and to maximize FFT amplitude. The oscillation frequency changed slightly with a different tangential distribution of heat release for different air flows. Numerical simulation was performed using the CFD method to obtain temperature and flow field distribution of the Rijke tube with different spacing of the heating element. The numerical results showed that a large high temperature and high speed region, forming immediately and simultaneously behind the heater, are conducive to thermoacoustic oscillation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.