Effects of dental laboratory processing variables and in vitro testing medium on the porcelain adherence of high-palladium casting alloys

Abstract

Purpose. This study assessed the effects of dental laboratory processing variables and testing medium on porcelain adherence of representative high-palladium alloys. Material and methods. The processing variables were recasting two and three times, porcelain stripping with hydrofluoric acid and rebuilding, and changing the recommended oxidation procedures. The testing medium was air for these four groups and the nontreatment group. In the last group, the specimens were stored and tested in artificial saliva. The metal ceramic specimens were fractured with biaxial flexure in constant strain. The area fraction of adherent porcelain (%) was calculated with a standardized spectrometric technique. A gold-palladium alloy served as the control. Results. Recasting without adding new alloy negatively affected some high-palladium alloys. Porcelain stripping did not cause a decrease in adherence of the tested alloys. The alternate oxidation treatment reduced significantly the porcelain adherence of the Au-Pd and one Pd-Cu-Ga alloy. Storage and testing in artificial saliva did not significantly affect the porcelain adherence of the alloys. The Au-Pd alloy exhibited the highest porcelain adherence. (J Prosthet Dent 1998;79:514-9.)