Abstract
To satisfy the property requirements for biodegradable medical implants, Zn alloyed with low levels of Mg (≤0.8 wt%) has attracted increased research interest. In the present study, deformation twinning was observed in tensile tests and twinning appears to have an adverse impact on ductility. The profuse twinning in the as-cast Zn-Mg alloys accelerated crack growth in tension due to twinning impingement which caused local stress concentrations and initiates cracking. As-rolled Zn-Mg alloys have better ductility than their as-cast counterparts due to the inhibition of twinning by the refined Mg2Zn11 intermetallic phase and the finer grain size.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.