Abstract

Groundwater artificial recharge and medium characteristics represent the major factors in controlling the groundwater flow processes in managed aquifer recharge areas. According to the depositional features of alluvial fans, an analogous homogeneous phreatic sand tank aquifer and the corresponding inhomogeneous scale numerical models were established to investigate the groundwater flow under the combined influence of artificial recharge (human activities) and decaying hydraulic conductivity (medium characteristics). In this study, groundwater flow through a managed aquifer recharge area in an alluvial fan was analyzed under the conditions of decaying hydraulic conductivity (K) with depth or length from apex to apron. The results showed that groundwater flow processes induced by artificial recharge were significantly controlled by the increasing decay exponents of K. The decaying K with depth or length in alluvial fan areas expanded the degree of influence of artificial recharge on groundwater flow. With the increase of decay exponents, the flow directions gradually changed from a horizontal to vertical direction. Groundwater age and spatial variability could also be increased by the increasing decay exponents. The residence time distributions (RTDs) of ambient groundwater and artificially recharged water exhibited logarithmic, exponential, and power law behavior. Penetration depth and travel times of ambient groundwater flow could be affected by artificial recharge and decay exponents. Furthermore, with the increase of decay exponents, the thickness of the artificially recharged water lens and travel times of artificially recharged water were increased. These findings have important implications for the performance of managed aquifer recharge in alluvial fan areas as well as the importance of considering the gradual decrease of K with depth and length.

Highlights

  • IntroductionAlluvial fans are generally defined as semi-conical depositional landforms along mountain piedmonts [16], which have a morphology that consists of three main parts from apex to apron: inner fan (short extension and coarse granulometry of deposits), mid fan (smaller grain-size of particles and bedded deposits), and outer fan (largest area made by fine-grained bedded deposits) [17]

  • Groundwater flow patterns induced by different depth- and length-decay exponents and artificial recharge

  • Human activities and medium characteristics represent the major factors in controlling the groundwater flow system on a regional scale

Read more

Summary

Introduction

Alluvial fans are generally defined as semi-conical depositional landforms along mountain piedmonts [16], which have a morphology that consists of three main parts from apex to apron: inner fan (short extension and coarse granulometry of deposits), mid fan (smaller grain-size of particles and bedded deposits), and outer fan (largest area made by fine-grained bedded deposits) [17] These features (the particle size decreases gradually from coarse to fine from apex to apron) reflect the facies architecture developed during their evolution and formed due to the change of hydrodynamic conditions [17,18,19]. K of the alluvial fan aquifer in the northwest of the Hetao basin decreases from 2.0 m/d along the mountain front to 0.2 m/d in the downdip region [22]

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call