Abstract
In-situ SEM observation of fracture toughness tests has been used to characterize the fracture behavior of a wrought aluminum alloy. Particular attention is given to in-situ fracture strength of the coarse inclusions associated with this alloy. The fracture domain of CuAl 2 and Al 2 CuMg particles with respect to the main crack is also investigated. Crack propagation is conducted by ductile failure of matrix ligaments between the fractured particles and the main crack, thereby producing slight crack deflection. Coarse Al 3 Zr and Al 3 Ti particles even adjacent to the fracture surface remain intact, while CuAl 2 and Al 2 CuMg particles are extensively damaged ahead of a crack-tip. A combination of HRR singularity and Eshelby type internal stress analysis is used to estimate the in-situ strength values of various inclusion particles. It is concluded that the fracture strength of the inclusion particles has strong dependence on diameter. For example, it decreases from 740 to 500 MPa for the Al 2 CuMg. By decreasing the volume fraction of the coarse inclusions larger than 3μm from 2.2 to 1.2% by applying various heat and thermo-mechanical treatments, 0.2% proof stress, fracture toughness and crack propagation resistance of the alloy are remarkably improved without sacrificing ductility.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
