Effects of crumb rubber and styrene-butadiene rubber additives on the properties of asphalt binder and the Marshall performance properties of asphalt mixtures

Abstract

The primary aim of this study is to evaluate the impact of incorporating crumb rubber (CR) and styrene-butadiene rubber (SBR) additives, ranging from 0% to 5% by weight of bitumen, on the performance of a bituminous concrete mixture using the wet process. Laboratory experiments, including the Marshall test, were conducted to establish the optimum bitumen content (OBC) for the hot mix. The study focuses on determining the optimal proportions of CR and SBR to achieve maximum strength. The results show that increasing the proportions of both CR and SBR leads to significant improvements in strength, with the maximum stability recorded at 16.14 kN and a flow of 1.23 mm for a mix containing 5% CR and 4% SBR. The findings further suggest an inverse relationship between CR content and strength, while an increasing SBR content enhances strength. Consequently, the optimal proportions for incorporating CR and SBR additives are identified as 5% and 4%, respectively.